3 Get started
Charge power
VIDEO4.3 has a
Connect VIDEO4.3 to a PC by using the USB cable.
Note
When you connect VIDEO4.3 to a computer, you are
EULHÁ\SURPSWHGWRVHOHFW [Charge & transfer] or [Charge & play]. If no option is selected, [Charge & transfer] applies.
To play the VIDEO4.3 when you charge power, select [Charge & play].
Battery level indication
The display indicates the approximate levels of the battery status as follows:
100% 75% 50% 25% 0%
»$ÁDVKLQJEDWWHU\VFUHHQLQGLFDWHVWKDW the battery is low.The player saves
all settings and switches off within 60 seconds.
Note
Rechargeable batteries have a limited number of charge cycles. Battery life and number of charge cycles vary by use and settings.
The charging animation stops and the 
icon is displayed when the charging process is completed.
To conserve battery power and increase the play time, do the following on VIDEO4.3:
Set the backlight timer to a low value (go to 
> [Display settings] > [Screen off timer]).
Charge through a USB AC/DC adapter
To charge VIDEO4.3 through a USB AC/DC adapter, use Philips AY5800 (Input: 100 - 240 V, ~50/60 Hz, 0.15 A; Output: 5.0 V, 0.5A).
Switch the player on or off
Press and hold 
until the player is switched on or off.
Automatic standby and shut-down
The player has an automatic standby and shut- down feature that can save battery power.
If in idle mode (no play, no button is pressed) for a certain time duration, the player switches off automatically.
7RGHÀQHWKHWLPHGXUDWLRQ
From the Home screen, go to 
> [Set
10EN
