Philips SBC RU 520/00U manual Instructions for use Installing the remote control

TV VCR/DVD

XP SBC RU 520/00.3 06-02-2004 14:09 Pagina 5

Instructions for use

2. Installing the remote control

Inserting the batteries

1Press the cover inwards and slide it in the

direction of the arrow.

2 Place two R03, UM4 or AAA type batteries into the battery compartment, as shown.

3 Slide the cover back and click it firmly into place.

Testing the remote control

The remote control has been programmed to operate most Philips appliances. Because the RU520 may use different signals for each make and even for different models of the same make, it is advisable to test whether your appliance responds to the RU520.

The example below (TV) instructs you how to do this. You can repeat the same steps for other appliances

(VCR/DVD players/recorders) which you want to operate using the RU520.

Example of TV:

1Turn your TV on manually or use the original remote control. Tune to channel 1.

2 Use the RU520’s mode selector to select TV. Press the key until the green light under TV in the selector window lights up.

If no green light appears, check whether the batteries are properly inserted

(see ‘Inserting the batteries’).

3Check whether all the keys are working.

AV

	For an overview of the keys and their			PROG
	functions see ‘3. Keys and functions’.	VOL		VOL
–	If the TV responds as it should to all of the key			PROG
	commands the RU520 is ready for use.	M
				K
		E	NU
				O

•If the device does not respond at all or not to all of the key commands, follow the instructions under

‘Setting the remote control’.

English

5