Philips SBC RU 520 manual SET-UP for USE, Your equipment is a Philips brand

TV VCR

TV VCR

Instructions for use

Try other shift/key combinations on your equipment to
discover which functions are available.		English
Remember that you can’t get access to additional functions if
these functions were not available on the original remote
control of your equipment!
To switch on teletext.
To enlarge the teletext display on screen.
To stop changing teletext pages.
To switch off teletext.
If you use the memory out key (fi) to access the next
teletext page on your Philips TV, see Troubleshooting.
Fasttext	VCR
Red	Rewind
	Record
Green	Stop
Yellow	Play
Blue	Forward
	Pause

SET-UP FOR USE

A D V I C E

Carefully read the complete procedure before starting!

Your equipment is a Philips brand:

1 Press the mode selector key for the device you want to operate.

2 Press the power key to test.

–The green indicator LED under each device (TV or VCR) lights up to confirm the mode you’re in.

C H E C K

Press a few keys to check correct response. If response is not correct, go to the next paragraph.

Your equipment is of another brand, or your equipment is a Philips brand, but not all keys respond correctly:

1 Press the mode selector key to select the device (TV or VCR) you want to operate.

2 Look up the brand name of the device you want to operate in the code list (centre of this manual).

Make sure you choose the correct code list for your device!

3