ENInstall
For UHF reception, position the
dipoles as shown**
For channels 14 through 69, rotate and/or tilt the center loop towards the transmitter.
Using the selector switch
Choose your signal source by switching
from ANTENNA to CABLE.
Note that in the CABLE position,
1 LED lamp will illuminate.
Less MoreFine-tune the picture
gain gain
Slowly increase the gain until you achieve the clearest picture possible. Rarely, it is necessary to use the maximum gain.Too much gain may result in poor picture quality.
Table des matières | FR |
|
|
10Contenu de la boîte
11Branchez
11Connectez le câble coaxial à l’antenne
11Connectez le câble coaxial à votre TV
12Branchez l’alimentation
12Installez
12Repérez la source du signal
12Pour la réceptionVHF
13Pour la réception FM
13Pour la réception UHF
13Utilisation du sélecteur
13Réglage de l’image
13Garantie à vie limitée
Contenu de la boîte
Limited lifetime warranty
The manufacturer warrants that this product shall be free from defects in material, workmanship and assembly, under normal use, in accordance with the specifications and warnings, for as long as you own this product.This warranty extends only to the original purchaser of the product, and is not transfer- able. Defective products, together with the dated proof of purchase, must be returned to the place of purchase for repair or replacement.THERE ARE NO OTHER EXPRESS WARRANTIES. Incidental and consequential damages are disclaimed where permitted by law. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Câble coaxial RG59
Antenne
Transformateur
correspondant
Transformateur
de puissance
MANT510
MNT510F
EN | Instructions for use | 2 |
ES | Instrucciones de manejo | 6 |
FR | Mode d’emploi | 10 |
Table des
matières
5 | 10 |
