Philips SDV7700K/17 user manual Lead-InWire, Band Separator, Assembly

EN

8

Assembly

Lead-In Wire

•Attach lead-in wire to house with screw-type standoffs.

•Tighten standoffs with pliers after wire is installed.

•Avoid sharp bends in lead-in wire.

•Form drip loop where wire enters wall.

•Wall mounts not included.

•Mounts, mast and standoffs are not included.

Band Separator

•Attach band separator to appropriate terminals on TV set.

•Attach antenna lead-in wire to band separator.

•An FM set or second TV set may be attached to second output of band separator.

NOTE: Band separator is only required for older TV sets with sep- arate VHF/UHF inputs. For most newer sets, simply connect cable from antenna to ‘F’ input.