Note: If the VCR or DVD recorder records a television program, you watch the recorded channel.
Note: how to watch a video source on TV1?
Use your TV1 and your video source as usual to watch a video source on TV1.
Note: In case the video source does not react the IR control blaster might not be installed properly. See the FAQ “How can I find the IR sensor on the video source?” for locating the IR sensor on the front panel of the video source.
3.5Select Source
Switch between the two video source images by pushing the source switch on the Transmitter.
3.6Remove interference on TV2
Depending on your specific situation, after completing 3.1 and 3.3, you may experience some interference.
1.Find the CHANNEL switch on the transmitter (A). There are 4 channels. You may have to change the channels in case of interferences.
2.Set the CHANNEL switch to a different number on the transmitter
(A)in case of interferences.
12
3.Find the CHANNEL switch on the receiver (B).
4.Set the CHANNEL switch to the same number as on the transmitter
(A).
3.7Improve the quality of the reception with the antenna
1.Adjust the orientation of the antenna of the receiver for best picture.
2.Best transmission performance you obtain when the front sides of the transmitter and receiver antennas are "faced" to each other in an imaginable straight line.
