Easylink feature does not work.
•Check if the TV and VCR support Easylink.
•Check if you used
Black and white image with
•(Super Video Home System Video/ Cassette/Recorder)
•Check if the SCART connector of the
How can I find the IR sensor on the video source?
•The blaster light needs to be positioned precisely on the IR sensor of the video source. Some equipments have the letters IR at the front indicating the location of the IR sensor. In case there is no indication the position can be found by moving the blaster light slowly over the front of the video source while a 2nd person operates the remote control at the location of TV2. At least make sure that the remote control is out of range of the video source. When the video source starts to react the IR sensor location is found. Mount the blaster light on this location at the front of the video source.
•Another possibility is to move the remote control over the front of the video source while operating it. Once the video source starts to react the location of the IR sensor is found. This method is less accurate and does not work for each remote control model.
•Also consult the documentation of your video source to locate the IR sensor.
How can I watch a different channel on TV1 and TV2 simultaneously?
•Watching two different channels is only possible if you use two tuners. For example TV1 uses its internal tuner and TV2 uses the tuner of the VCR. For switching channels on TV2 you switch then between the channels stored in the VCR. Note that this is not possible when you have a digital cable.
•Connect your antenna cable to both your TV1 and your VCR.
•Search for the TV channels on your VCR and store them in your VCR.
•Connect the transmitter (A) to the output of the VCR.
•Connect the receiver (B) to the input of TV2.
•To switch TV channels on TV2 switch the channel on your VCR.
Frequently asked questions | 15 |
