Philips SRU8015 manual Rename a Device To rename a device, Delete a Device, D Note

SRU8015_IFU_Bundel1v4.qxd 16-05-2007 17:01 Pagina 12

3Select the device you want to copy the volume keys to (e.g. DVD or SAT box).

4Confirm you want to copy the volume keys from one device to the other.

The volume keys are copied.

4.1.4Rename a Device To rename a device:

1 Go to Setup - Devices, select Rename Device and press . 2 Enter the new label with the alphanumeric keys.

DNote

You can delete characters with the Clear key and the left cursor.

3Confirm the new label. The device is renamed.

4.1.5Delete a Device

To delete a device:

1 Go to Setup - Devices, select Delete Device and press . 2 Select the device you want to delete.

3 Confirm you want to delete the device. The device is deleted.

DNote

Keys of the deleted device that are used elsewhere, e.g. in an activity or the volume keys you copied, will be deleted as well.

Check the activities you installed and reinstall them if necessary. See ‘Add an Activity’ on page 12.

Check the volume keys for your devices and reinstall them if necessary. See ‘Copy the Volume’ on page 11.

4.2Activities

4.2.1Add an Activity

You can add activities to the SRU8015. An activity consists of several key presses that the SRU8015 sends out with just one press.

By default the SRU8015 inserts a delay of 600ms between every key press to make sure your devices are responding correctly to the IR signals.You can overwrite this default delay.

•If one of your devices needs a longer delay before receiving the next IR signal, you can insert a delay of 1, 3, 5 or 15 seconds.

•If an activity needs a long key press, e.g. turn up the volume, you can select the option hold last key.

12 Getting the Most out of Your SRU8015