Philips SRU 1020 manual Keys and functions, Selects TV or DVD mode, DVD opens disc menu

6ENGLISH

2Press the TV key to select TV. Press the key until it lights up.

3Keep keys s and y on the SRU 1020 pressed simultaneously for 5 seconds until the TV key remains lit.

4Press the y key of the SRU 1020 and keep it pressed.

–The SRU 1020 now starts emitting all known ‘TV off ’ signals, one by one. Each time a code is sent, the TV key flashes.

5When your TV switches off (stand-by), immediately release the

y key of the SRU 1020 to confirm.

–The SRU 1020 has now found a code that works on your TV.

6 Check if you can operate all functions on your TV with the SRU 1020.

•If this is not the case, you can redo the automatic setting.

The SRU 1020 will then search for a code that perhaps works better.

–After the SRU 1020 has run through all the known codes, the search will stop automatically and the TV key stops flashing.

–Automatic programming of a TV takes a maximum of 6 minutes. For DVD this time is 2 minutes.

3. Keys and functions

The illustration on page 3 gives an overview of all keys and their functions.

1	y (Standby)	switches the TV on or off.
2	TV - DVD	selects TV or DVD mode.
3	E / MENU	TV: selects between regular (4:3) and wide screen (16:9) TV.
		DVD: opens disc menu.
4	VOL –	TV: reduces the TV volume.
		DVD: menu navigation (cursor left).
5	5 / A	TV: favorite channel A.	DVD: rewind.
	2 / B	TV: favorite channel B.	DVD: play.
	6 / C	TV: favorite channel C.	DVD: wind.
	9 / D	TV: favorite channel D.	DVD: stop.
	; / E	TV: favorite channel E.	DVD: pause.