English
INSTALLING THE HANDSET
Inserting/Replacing batteries
Your handset is powered by two rechargeable AA/R6 batteries. |
| + | |
Only AA 600 mAh rechargeable batteries should be used as replacements. | + |
| |
| Never use non rechargeable batteries. |
| - |
|
| - |
|
1. Slide down the cover | 2. Insert batteries following the diagram. |
| |
on the back of the telephone. |
|
| |
1
2
3. Close the cover.
The handset automatically switches to subscription mode.
Registering your additional KALA 200 handset with the base station
1.Unplug the electricity supply lead underneath the base station, then plug it back again.
2. Select the additional handset setting icon (see Page 5, for instructions on how to select a programming icon). You will hear an invitation beep.
3. Enter your RC code (shown on the label underneath the base
station). Press 
to validate.
4.Your handset will then search for the base station. When the base station is detected, you will hear a validation beep. Otherwise, an error beep will be heard.
Telephone connection
On the bottom of the charger, connect the power supply then plug the power adaptor into the easily accessible wall socket.
Only use the power cable supplied with the telephone. Place the handset on the charger.
On first use or when new batteries have been inserted, charge the batteries for at least 24 hours.
Telephone range
The “area symbol“ on the display indicates that the handset is registered on the base station.
2
