English
PROGRAMMING OPTIONS (CONT’D)
How to register the handset with another base station
This option is only used to connect your handset to another base station for increased range (you should reset the base station before entering the RC code).
Function number | Programmable function | Select |
1/1 | Registers the handset | Type value 0000 to 9999 |
Earpiece programming option |
| |
Function number | Programmable function | Select |
1/1 | Modifies earpiece volume | List: 1 to 4 |
Should you use a KALA 200 base station as your main telephone installation, please visit www.pcc.philips.com for details concerning the telephone answering machine options and other settings. For all other equipment, consult your base station user guide.
TROUBLESHOOTING
Problem
•No dialling tone when pressing the talk key.
•Area icon not displayed or blink- ing.
•When the handset is placed on the charging unit, no beep is heard.
•Battery icon remains empty although the handset has charged for 24 hours.
•No symbol on the display.
•Bad audio quality (cracks, mute, echo, vibration, etc.).
Error Beep
Yes
Yes
-
-
-
-
-
-
-
Cause or causes
The base station is not properly connected to electricity or to the telephone sockets.
Batteries are low.
The handset is out of range.
The handset is not placed correctly on the base station charging unit.
Charging contacts are dirty. Handset batteries are defective.
Batteries are low.
Base station plugged too near from other electrical appliance.
Base station installed in a room with thick walls.
You are using the handset too far from the base station.
Solution
Check the connections.
Charge batteries.
Register the handset to the base station.
Take the handset off the charger and put it back again.
Clean them with a clean and dry cloth.
Please contact your PHILIPS dealer in order to purchase new rechargeable batteries (see Inserting/Replacing batteries Page 2).
Charge batteries.
Try to plug the base station in another place.
Try to plug the base station in another place.
Move closer to the base station.
Philips has designed this product to work on PSTN line and cannot guarantee the complete application on ISDN network.
6The KALA TD6830 is compliant with operator’s analogue interface.
