Philips TDA8001

1996 Dec 12 12

Philips Semiconductors Product speciﬁcation

Smart card interface TDA8001

LIMITING VALUES

In accordance with the Absolute Maximum Rating System (IEC 134).

Note

1. Ptot =V

DD×(IDD(unloaded) +∑Isignals)+I

CC ×(VDD −VCC) + max.{(VH−VPP)×IPP(read) +(V

H−V

PP)×IPP(write)}

H×I

H(unloaded) +V

SUP ×ISUP +(V

DD−CVNC) ×ICVNC, where ‘signals’ means all signal pins, except supply pins.

SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT

VDD supply voltage −0.3 18 V

Vx1 voltage on pins VPP21, VPP15, VPP12.5, PRES,

PRES, CMDVCC, OFF, ALARM, DETECT and RSTIN 0V

DD V

VHvoltage on pin VH030V

PP voltage on pin VPP 0V

SUP voltage on pin VSUP 012V

x2 voltage on pins ALARM and DELAY 0 VSUP V

Vx3 voltage on pins XTAL, I/O(µC), CLKOUT2, CMD7,

CMD3.5 and CVNC 0 6.0 V

Vx4 voltage on pins I/O, RST, CLK and VCC duration <1 ms 0 7.0 V

Ptot continuous total power dissipation TDA8001;

Tamb = +70 °C; note 1;

see Fig.10

−2W

TDA8001T;

Tamb = +70 °C; note 1;

see Fig.11

−0.92 W

Tstg storage temperature −55 +150 °C

Ves electrostatic voltage on pins I/O, VCC, VPP, RST, CLK,

PRES and PRES

−6+6kV

electrostatic voltage on other pins −2+2kV