Philips TH-42PH10EK operating instructions Basic Controls

Basic Controls

Remote control sensor
INPUT	MENU	-/	VOL	+/	ENTER/

Volume Adjustment Volume Up “+” Down “–” When the menu screen is displayed:

“+”: press to move the cursor up

“–”: press to move the cursor down

(see page 16)

Enter / Aspect button (see page 16, 18)

Main Power On / Off Switch

Power Indicator

The Power Indicator will light.

•Power-OFF .... Indicator not illuminated (The unit will still consume some power as long as the power cord is still inserted into the wall outlet.)

•Standby.......... Red

•Power-ON ...... Green

•DPMS.............Orange (With PC input signal and during operation of PC’s screensaver.)

SURROUND button

The surround setting switches on and off each time the SURROUND button is pressed.

The benefits of surround sound are enormous. You can be completely enveloped in sound; just as if you were at a concert hall or cinema.

Note:

The surround settings are memorized separately for each Sound Mode (Normal, Dynamic, Clear).

On Off

MENU Screen ON / OFF

Each time the MENU button is pressed, the menu screen will switch. (see page 16)

Normal Viewing Picture Setup

Sound Pos. /Size

INPUT button

(INPUT1, INPUT2, INPUT3 and PC selection) (see page 13)

N button (see page 19, 22, 23, 24, 25)

POS. / SIZE button (see page 19)

PICTURE button (see page 22)

INPUT button

(INPUT1, INPUT2, INPUT3 and PC selection)

Press to select INPUT1, INPUT2, INPUT3 and PC input SLOTS sequentially. (see page 13)

Sound mute On / Off (see page 25)

Numeric buttons (see page 37)

ASPECT button

Press to adjust the aspect. (see page 18)

MULTI Window buttons (see page 20)

Surround On

14