Philips TH-42PH10EK operating instructions Effect Details Black, High, Low G

Picture Adjustments

(For TH-42PH10EK/S, TH-50PH10EK/S, TH-58PH10EK)

		Advanced settings	2/2
Advanced settings	1/2	W/B High R	0
Normalise Normal		W/B High G	0

Black extension	0	W/B High B	0
Input level	0	W/B Low R	0

Gamma		2.2	W/B Low G		0
AGC		Off	W/B Low B		0
Item	Effect						Details
Black			Adjusts the dark shades of the image in gradation.
extension	Less	More
Input level			Adjustment of parts which are extremely bright and hard to see.
	Less	More	(This cannot be adjusted when the input signal is Digital.)
Gamma	Down	Up	S Curve	2.0		2.2		2.5
AGC	Off	On	Increases the brightness of dark signal automatically.
W/B High			Adjusts the white balance for light red areas.
R	Less	More
W/B High			Adjusts the white balance for light green areas.
G	Less	More
W/B High			Adjusts the white balance for light blue areas.
B	Less	More
W/B Low R	Less	More	Adjusts the white balance for dark red areas.
W/B Low G	Less	More	Adjusts the white balance for dark green areas.
W/B Low B	Less	More	Adjusts the white balance for dark blue areas.

Notes:

•Carry out “W/B” adjustment as follows.

1.Adjust the white balance of the bright sections using the “W/B High R”, “W/B High G” and “W/B High B” settings.

2.Adjust the white balance of the dark sections using the “W/B Low R”, “W/B Low G” and “W/B Low B” settings.

3.Repeat steps 1 and 2 to adjust.

Steps 1 and 2 affect each other’s settings, so repeat each step in turn to make the adjustment.

•The adjustment values are memorized separately for each input terminal.

•The adjustment range values should be used as an adjustment reference.

Helpful Hint ( /

Normalise

Normalisation)

On the remote control unit, while the “Advanced settings” menu is displayed, if either the N button is pressed at any time or the ACTION () button is pressed during “Normalise”, then all adjustment values are returned to the factory settings.

24