Philips TH-42PH10EK Aspect Controls, Board TY-FB9BD, Panasonic Auto cannot be selected, Pressed

ASPECT Controls

The Plasma Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture.

Press repeatedly to move through the aspect options:

	4 : 3	Zoom	16 : 9
	Panasonic Auto		Just
	Note:
[from the unit]	When selecting an input slot that attaches BNC Dual Video Terminal
	Board (TY-FB9BD), Panasonic Auto cannot be selected.
	The aspect mode changes each time the ENTER button is
	pressed.
INPUT MENU -/ VOL +/ ENTER/
[During MULTI PIP Operations]	4 : 3	16 : 9
• Picture and Picture, Picture in Picture :
• Others	: Aspect switching is not possible.

Notes:

•For PC signal input, the mode switches between “4:3”, “Zoom” and “16:9” only.

•For a 1125 (1080) / 60i · 50i · 24p · 25p · 30p · 24sF, 1250 (1080) / 50i, 750 (720) / 60p · 50p signal input, the mode is set to “16:9” mode, and switching is not possible.

•Panasonic Auto can be selected only during Video signal input.

•The aspect mode is memorized separately for each input terminal.

Mode		Picture			Explanation
	4				4:3 will display a 4:3 picture at its standard 4:3 size.
	4 : 3
4 : 3		3
	4		16		Zoom mode magnifies the central section of the picture.
			Zoom
Zoom		3		9
	4		16		16:9 will display the picture at its maximum size but with slight
			16 : 9		elongation.
16 : 9		3		9
	4		16		Just mode will display a 4:3 picture at its maximum size but with
			Just		aspect correction applied to the center of the screen so that
Just		3		9	elongation is only apparent at the left and right edges of the screen.
					The size of the picture will depend on the original signal.
	4		16		The display will automatically become enlarged (depending on the
			Panasonic Auto		picture source), allowing you to view the picture at its maximum
		3		9	size.
					Notes:
					• Panasonic Auto mode is designed to automatically adjust the
	For an elongated image		Image is expanded		aspect ratio to handle a mix of 16:9 and 4:3 program material.
Panasonic					Certain 4:3 program material, such as stock market data screens,
	4		Changes in		may occasionally cause the image size to change unexpectedly.
Auto
			accordance with		When viewing such programs, it is recommended that the ASPECT
		3	the Panasonic Auto		be set to 4:3.
			mode setting (see		• If adjusting the Picture V-Pos/V-Size in Panasonic Auto with 16:9
					mode, the adjustment is not memorized. When exiting the mode,
			page 39).
					the screen will return to a former adjustment.
	For a 4:3 image
					• Panasonic Auto can not be selected while BNC Dual Video
					Terminal Board (TY-FB9BD) is installed.

Note:

Do not allow the picture to be displayed in 4:3 mode for an extended period, as this can cause a permanent image retention to remain on the Plasma Display Panel.

18