Using the AUDIO/VIDEO Input Jacks | Philips TP2784C1 instruction

USING THE AUDIO/VIDEO INPUT JACKS

AUDIO/VIDEO INPUTS

The TV’s Audio/Video Input jacks are for direct picture and sound connections between the TV and a VCR (or similar device) that has Audio/Video Output jacks.

BEGIN

Connect the VIDEO (yellow)

CABLE to the VIDEO IN-1 jack on the back of the TV. Then con- nect the AUDIO (red and white) CABLES to the AUDIO (left and right) IN-1 jacks on the rear of the TV.

Connect the VIDEO (yellow)

CABLE to the VIDEO OUT jack on the back of the VCR. Then connect the AUDIO (red and white) CABLES to the AUDIO (left and right) OUT jacks on the rear of the VCR.

Turn the VCR and the TV ON.

Use the AV button on the remote to select the AV 1 chan- nel.

With the VCR ON and a prere- corded tape inserted, press the PLAY button to view the tape on the television.

NOTE: Repeatedly pressing the AV button on the remote will toggle the picture source from the current chan- nel, to the last channel viewed, then to the AV 1 connection, then to the AV 2 connection.

This also applies to the Multi Media button on the remote. Repeatedly pressing the Multi Media button will toggle the picture source from the current channel, to the last viewed channel, then to the MM 1 (AV 1) connection, then to the MM 2 (AV 2) connection.

24

AV 1

AV 2

4

POWER

SLEEP

TV	AV	ON/OFF	POSITION	FREEZE
VCR	SWAP	SOURCE	PIP CH
			UP	DN

ACC

SMARTSMART

SOUNDPICTURE

MENUSURF

VOL			CH
	MUTE
CC	STATUS	CLOCK	A/CH
	EXIT	TV/VCR
VCR			MULTI
RECORD	INCREDIBLE		MEDIA
	INCREDIBLE

STEREO

When using the Audio/Video IN-1input jacks, the video and sound can be viewed and heard on the AV 1 channel.

When using the Audio/Video IN-2input jacks, the video and sound can be viewed and heard on the AV 2 channel.

BACK OF TV

1

	S-VIDEO
	VIDEO
	L
ANT "A"	AUDIO
75	R/MONO

IN-1OUT

VIDEO IN (YELLOW)

AUDIO IN	2
(RED/WHITE)	2
OUT	OUT ANTENNA
	IN

BACK OF VCR

R AUDIO L	VIDEO ANTENNA
	OUT
IN	IN

3

VCR

(EQUIPPED WITH VIDEO AND

AUDIO OUTPUT JACKS)

IF YOU ARE USING A

NON-STEREO DEVICE,

USE ONLY THE AUDIO

R/MONO JACK.

31

Image 31

Philips TP2784C1 manual Using the AUDIO/VIDEO Input Jacks, Connect the Video yellow

Contents

TP2784C1 Warranty Verification Safety Instructions Read before operating equipment Table of Contents Cable/Antenna Features Press the STATUS/EXIT button Adjusting the TV Picture Press the Numbered buttons Setting the TV’S Clock Activating the TV’S on Timer Control Press the STATUS/EXIT button Selecting the TV’S on Timer Channel Start up time. Refer to page 8 for Further details Setting the TV’S on Timer Start TimeUse the Cursor UP or CUR SOR Down buttons to set AM or Turning on the on Timer Display Movie Ratings Understanding Smartlock Enter current access code Using Smartlock Setting UP the Access Code Press the Channel + or Using Smartlock Blocking Channels Press the STATUS/EXIT but- ton to remove the menu Using Smartlock Movie Rating Using Smartlock TV Rating Options Using Smartlock Blocking Using Smartlock Block Unrated Using Smartlock no Rating Example Blocking is set to OFF Reviewing the Smartlock Settings Viewing Blocked Programming Interference and improve Quality of the picture Turning on the Noise Reduction Control Contrast + option area Turn the Contrast + feature on Or OFFTurning on the Contrast + Control Trast + control Mode Using the Closed Caption Control Good BYE Sleep Using the Sleep Timer Control Balance may all be used to Adjust the sound playback of TV Adjusting the Treble , Bass , and Balance Sound ControlsPrograms Placed in the Stereo mode, the sound com Setting the TV for Stereo and SAP ProgramsRemember, if stereo is not present On a selected show and the TV is Press the Volume + or but Using the Incredible Stereo ControlUsing the Volume BAR Control Press the Volume + or Use the Cursor Left or Right buttons to set Setting the Audio OUT Control Using the TV Speaker Control and Audio Output Jacks Connect the Video yellow Using the AUDIO/VIDEO Input Jacks Connect the S-VIDEO Using the AUDIO/VIDEO Input Jacks CONT’D Button repeatedly to select either Press the Smart Picture Press the Smart Sound but Using the Smartsound Control EMPTY, Press to add Press the Channel + orPress the Surf button on Read, the Surf List is Find your Three-Digit Code on pages Setting the Remote Control to Operate Accessory DevicesRemote control number for your Place the TV/VCR/ACC Enter the THREE-DIGIT Place the TV/VCR/ACCPress the VCR Record Press the Smart Sound Search Method Turn on the device by press- ing the Power button on Remote VCR Code no Remote Control Direct Entry Codes Remote Dvdcode no Rewind Button Using the REMOTE’S VCR Buttons Move to the next page after Connect the Video OUTAlso connect the Audio OUT Right and Left jacks from AV 1, AV 2, SVID-R for picture Turn the TV and VCR orPress the PIP ON/OFF but Press the PIP Source but Using the PIP PICTURE-IN-PICTURE Feature Remember, although Adjusting the PIP Color and Tint Connect the Cable OUT on First use an optional signalConnect the Video OUT jack Connect a second yellow Video First connect the original cableConnect the ANT OUT jack on Connect the yellow Video Tips if Something Isnt Working TV Displays Wrong Channel or No Channels Above Index Glossary to Television Terms Philips Consumer Electronics Company Texas Limited Warranty