NOhW that you have looked up
e three-digit Remote Code
Number for your brand of device,
you are ready tofollow the/our
simple steps below.
Please read through steps 1-4
before beginning.
_Place the TV/VCR/ACC
IMode Switch in the proper posi-tion.
<_ Press the VCR RECORD
button onthe remote controland
release.
<_ Press the SmartSound button
Ion the remote within _0 seconds,
then release.
_@ Enter the THREE-DIGIT
REMOTE CODE NUMBER
for your desired device. The
remote isnow ready to send
commands to the unit.
<_ Point the remote the
at
Device. Press the POWER button
on the remote to turn the unit
ON.
I
VCR
Satellite Receiver
or DBS, etc.
Cable Converter
SWAP SOURCE POSITION FREEZE
0000
_P _
0
Remember, if this doesn't
iwork the first time, repeat steps
usingthe sameremote codenumber.
After a second tryand the remote
does not operate your device, seeif
there is another three-digit code num-
ber (pages 34-35) listed for your
device and repeat thesteps above
using thenew number.
If after repeated attempts the code
number method does not workyou
device, try the SEARCH METHOD
on page 33.
J
52