L2_ DIP hookup a a
with VCR and
1Digital Video Disc Player (or
similar device_
First connect the original cable
TV signal orAntenna signal tothe
ANT IN jack onthe back of the
VCR.
_Connect theANT OUTjack on
the rear of the VCR to the ANT IN
jack on the rear of theVideo Disc
Player.
<_ Connect the ANT OUT jack on
the rear of the Video Disc Player to
the 75_ input on the rear of the TV.
_ Connect the yellow Video Cable
from the VIDEO OUT jmckonthe
VCR to the VIDEO AV1 jack onthe
TV.Then, connect the red andwhite
Audio Cables from the AUDIO OUT
acks on the VCR tothe AUDIOAV1
acks on the rear of the TV (labeled
kUDIO L & R AV1).
<_ Connect the Video Cable
yellow
fromthe VIDEO OUT jack on the
VideoDisc Hayer to theVIDEO
AV2jack onthe TV. Then, connect
the redand white Audio Cables from
theAUDIO OUTjacks on the VCR
to the AUDIO AV2jacks onthe rear
of the TV (labeled AUDIO L& R
AV2).
Note: When selecting the PIP
SOURCE, the VCR will appear on
the EXT 1 channel, and the Video
Disc Player will appear on the EXT
2 channel.
O
REAR OFTV
I
VIDEO
CABLE
(YELLOW)
75 OHM COAXIAL CABLE
OUTSIDE UHF/VHF ,_/_ ./
ANTENNA OR
CABLE "IV SIGNAL
42