Picture-In-Picture(PIP) is the show-
ingof twopictures on the TV screen
at thesame time.(One main screen
picture and onesmall inset picture -
orPIP).
Please Note: A VCR (or Accessory
Device) is needed to supply the PIP
signal.
The foUow steps describe the basic
hookup needed to use PIP."
IB|QIN,
<_ First use an optional signal
splitter and connect the original
cable TV signal to both the
CABLE/ANT IN on the VCR and
the 75fl input jack onthe rear of the
television.
<_ Connect the VIDEO _UT jack
on the VCR to theVIDEO AVl jack
onthe TV.
<_ Connect the AUDIO OUT
(right and left) jacks from the
VCR to the AUDIO AV1 (right and
left) jacks on the television.
Be sure to turn the VCR ON while
using the PIP feaUures.The signal
suppliedthrough the VCR will
appear in the PIP window once the
PIP Source has been selected.
Please refer to the next page to learn
ho to set the PIP Source control.
BACK OFTV
ROUND CABLE 75 OHM
OPTIONAL TWO-WAY SIGNAL
(single 75 ohm Inputto twin 75
ohm Outputs -optional RF
Coaxial connecting cables also
required) ROUND CABLE
75 OHM
AUDIO IN
(REDAVHITE)
BACK OF VCR
For other possible PIP
!connections see pages 41-42
for the "More PIP Connections"
section.
If you need any accessories or parts
to complelz thedescribed PIP con-
nections, contact your dealer, orour
Parts Information Center at:
1-800-851-8885
VCR WITH AUDIO_IDEO OUPUTS
37