Installing the base station | Philips VOX300 manual

EN	Installing the base station

Installing the base station

Place your product close enough to the telephone and mains power sockets so that the cables will reach. To properly install the base station, plug the line cord and the power cable into the base station. Plug the cord and the cable into the wall. If you have a broadband DSL Internet connection, please make sure you have one DSL filter plugged directly on each line socket used in the house and check the modem and the phone are plugged in the correct filter slot (one specific for each).

Warning ! The electrical network is classified as hazardous according to criteria in the standard EN 60-950. The only way to power down this product is to unplug the power supply from the electrical outlet. Ensure the electrical outlet is located close to the apparatus and is always easily accessible.

Please take care that the power supply and telephone line are connected to the correct sockets as incorrect placement could damage your equipment.

Warning ! Always use the line cable provided with the product otherwise you may not have a dialling tone.

1Connect the telephone line cord delivered with the

product.

2Connect the power supply.

1 2

10

Image 10

Philips VOX300 user manual Installing the base station

Contents

Charge the handsets for 24 hours Before use Welcome mode ContentsEN Important information For your safetyPower requirements Telephone connection What’s in the box Handset and base station CD 135 Handset Answer machine functions Recall key / Play new messages received on answer machine CD 135 base station Answer machine indicatorPaging key Icons on the handset display Installing the base station Installing the base station Installing and replacing the batteries in the handset Installing the batteriesUsing GAP standard compliance Battery life and range EN Using GAP standard compliance Using the menus Menu structure Language list Keypad lock / unlock Handset power OFF and onText or number entry Example to write Peter Answering a call / Hanging up CallENMaking a call ENCall To switch the handset loudspeaker on / OFF call handsfreeAdjusting the earpiece and loudspeaker volume during a call To mute the handset microphone during a call Calling a number from the redial list Accessing / exiting the redial listRedial list Saving redial list numbers into the phonebook Deleting a number from the redial list Deleting all numbers from the redial list Adding a new entry PhonebookENChanging a phonebook name or number Delete whole phonebook list when browsing phonebook list Edit a number when browsing phonebook listDelete an entry when browsing phonebook list ENPhonebook Delete a phonebook entry when in idle mode Delete whole phonebook list when in idle mode Consulting the call log Accessing / exiting the call logCall log Calling a number from the call log Deleting a Call log entry Deleting all the Call log entries Switch between internal and external call Using the IntercomCall transfer to a specific handset when on line Internal call Paging Clock and Alarm SettingsOther functions Chain Dialing To set the handset ringer volume or silence mode Ringer OFF Personal settingsTo set the alarm tone To activate / deactivate the key tone To select the handset ring melodyTo rename the handset To change the display language Advanced settingsTo activate / deactivate the auto answer mode To change the recall time Local area code setting To change the dial modeTo set or change Call Barring To activate / deactivate Call Barring To set or deactivate the prefix number To set or change an SOS number To register a handset To unregister a handset To reset to default settings base station and handsetTo change the PIN code Default settings after Reset Unit Country selection Answer machine To switch the answer machine onHandset keys for answer machine control Saved messages To switch the answer machine OFFAdjusting the loudspeaker volume during message playback To listen to new messages Delete current message Answer machine settingsTo select the answer mode Available functions during message playback To activate / deactivate the remote control To set the number of rings before answering To activate / deactivate call screening To playback personal or default outgoing messagePersonal outgoing messages To record your personal outgoing message To record a memo Record and listen to a memoTo listen to a memo To remotely access your answer machine To remotely control your answer machine Troubleshooting Telephone troubleshooting ENTroubleshooting Answer machine troubleshooting InformationEN ENInformation Page 3111 285