Advanced settings |
| EN |
|
|
|
To change the dial mode* | *Country dependent | |
The default value of dial mode that is preset in your CD 135 should be the best suited for your country network and therefore you should not need to change it.
1.Press 
and press Down 
to reach ADVANCE SET.
2.Press 
and press Down 
to reach DIAL MODE.
3.Press 
, scroll 
to select TONE or PULSE and press 
to confirm.
Local area code setting*
*Country dependent
If your local PSTN sends the CID with local area code attached, it is necessary to filter out the local area code when dial back from call log. The AREA CODE function allows you to remove the local area code from the call log entries. The local area code can be set from 1 to 4 digits. The default setting is blank.
1.Press 
and press Down 
to reach ADVANCE SET.
2.Press 
and press Down 
to reach AREA CODE.
3.Press 
to view the current setting.
4.Enter the new area code 
(the maximums for the area code is 4 digits) and
press 
to save.
To set or change Call Barring
This menu allows you to limit the use of your phone to specific calls by barring parts (prefix) of outgoing numbers. You can set 4 different barring numbers.
1.Press 
and press Down 
to reach ADVANCE SET.
2.Press 
and press Down 
to reach CALL BARRING.
3.Press 
and enter the PIN code 
(by default the PIN code is 0000).
4.Press 
, press Down 
to reach BARR NUMBER and press 
.
29
