42
EN
Answer machine troubleshooting
The handset displays „not
available“ :
•when attempting to add
another handset to the
base station,
•when using a handset.
•The procedure to add a
handset has failed, try
again.
•Maximum number of
handsets (5) has been
reached.
•Base station is already
busy with another
handset.
•Disconnect and connect
the base station power
supply.
•Remove and place back
the handset batteries.
•Follow the procedure to
register a handset
(page31).
•Unregister a handset.
•Wait until it is available.
Noise interference on your
radio or television
•The CD 135 base station
or mains power pack are
too close to electrical
appliances.
•Move the power pack or
base station as far away as
possible.
Caller Line Identification
(CLI) service does not
work.
•The service is not
activated.
•Check your subscription
with your network
operator.
A phonebook entry cannot
be stored.
•The phonebook is full. •Delete an entry to free
memory.
PROBLEMS CAUSES SOLUTIONS
The answer machine does
not record messages.
•The memory is full.
•The answer only mode is
activated.
•Delete messages.
•Select the Answer&record
mode (see page36).
The remote control access
does not work.
•The remote control
access is not activated.
•Activate the remote
control (see page37).
It is not possible to record
an outgoing message.
•The memory is full. •Delete old messages (see
page36).
The CD 135 hangs up
during remote access.
•Duration is too long. •Manage the remote
control quicker.
The answer machine stops
automatically.
•The memory is full. •Play and delete messages.
PROBLEMS CAUSES SOLUTIONS
Troubleshooting