VPZ210/VPZ215 4/3/99 3:16 PM Page 8
8 Hookups With a Cable Box
This connection allows you to view any channel. After you connect the Cable Box, VCP, and TV as shown below, the features described on this page will be available.
1.Connect Cable signal to IN Jack on Cable Box.
IN
OUT
ANT OUT
CH3
CH4
ANT IN
3.Use a second RF coaxial cable to con- nect the ANT(enna) OUT jack on the VCP to the TV’s ANTENNA IN Jack.
ANTENNA IN Jack
Back of TV (example only)
2.Use RF coaxial cable (supplied) to connect OUT Jack on Cable Box to
ANT(enna) IN Jack on VCP.
Watching TV With the VCP Off
1
Use the TV channel selector to set the TV to the Cable
Box output channel (channel 3 or 4).
2
Select the channel you want to watch at the Cable Box.
Playing a Tape
1
Use the TV channel selector to put the TV on the VCP output channel (channel 3 or 4, whichever the CH3/CH4 switch is set to).
2
Press the PLAY button to play the tape.
Helpful Hint
• With this hookup, channels cannot be selected at the TV. You must
