![Rear Panel 15](/images/new-backgrounds/184006/18400629x1.webp)
VPZ210/VPZ215 4/3/99 3:16 PM Page 15
Rear Panel 15
| ANT(enna) OUT Jack |
|
| Use the supplied RF coaxial cable |
|
| to connect this jack to the |
|
| ANTENNA IN jack on your TV |
|
CH3/CH4 Switch | or Cable Box. | AUDIO OUTPUT Jack |
Set to channel 3 or 4 to | Details are on pages | |
use your TV with your |
| Use an audio cable (not supplied) to |
VCP. Details are on pages |
| connect this jack to the Audio In |
|
| jack of a TV, camcorder, VCR, or |
|
| audio source. |
|
| Details are on page 10. |
| ANT OUT |
CH3 | AUDIO |
CH4 |
ANT IN
DC13.2V OUTPUT
VIDEO
ANT(enna) IN Jack
Connect your antenna or cable here. Details are on pages
AC Power Cord
Connect to a standard AC outlet to supply power to the VCP. Make sure the car battery cord is disconnected from the VCP.
DC 13.2V Jack (VPZ215AT only)
Connect the car battery cord here when you use the VCP in your vehicle. Details are on page 11. (This jack is not available on the VPZ210AT.)
VIDEO OUTPUT Jack
Use a video cable (not supplied) to connect this jack to the Video In jack of a TV, camcorder, VCR, or audio- visual source (laser disc, video disc player, etc.). Details are on page 10.