VPZ210/VPZ215 4/3/99 3:16 PM Page 9
Hookups With a Cable Box (cont’d) 9
This connection allows you to view any channel. After you connect the VCP, Cable Box, and TV as shown below, the features on this page will be available.
1.Connect a Cable signal to the VCP’s ANT(enna) IN Jack.
2.Use an RF coaxial cable (supplied) to connect the ANT(enna) OUT Jack on the VCP to the IN Jack on the Cable Box.
ANT OUT
CH3
CH4
ANT IN
TV ANTENNA IN Jack
3.Use a second RF coaxial cable to connect the OUT Jack on the Cable Box to the ANTENNA IN Jack on the back of the TV.
Watching TV With the VCP Off
1
Use the TV channel selector to set the TV to the Cable
Box output channel (channel 3 or 4).
2
Select the channel you want to watch at the Cable Box.
Playing a Tape
1
Make sure the Cable Box is on the same channel as the
VCP’s CH3/CH4 switch.
2
Use the TV channel selector to put the TV on the Cable
Box output channel (channel 3 or 4).
3
Press the PLAY button to play the tape.
