![16 Playing](/images/new-backgrounds/184006/18400631x1.webp)
VPZ210/VPZ215 4/3/99 3:16 PM Page 16
16 Playing
Before playing a tape, make sure the VCP and TV are connected (see pages
TV and VCP
1
Turn on the TV. Set it to the same channel as the CH3/CH4 switch on the back of the VCP.
CH3 / CH4 |
Switch |
CH3 |
CH4 |
CH 4 |
or |
CH 3 |
ANT OUT
CH3
CH4
ANT IN
AUDIO | 1 |
DC13.2V OUTPUT | |
VIDEO |
2
Insert a tape in the VCP. The power will come on and playback will start automatically. The POWER light and the PLAY light will appear on the display panel of the VCP.
3
If the tape you want to play is already in the VCP, make sure the VCP power is on, then press the PLAY button.
4
To stop playback, press the STOP button on the remote control or the STOP/EJECT button on the VCP once.
5
Press the REW(ind)/SEARCH but-
ton on the remote control or the REW(ind) button on the VCP to rewind the tape.
6
When the tape has finished rewinding, press the EJECT button on the remote control once or the STOP/EJECT button on the VCP again to eject the tape.
2 Insert a tape in the VCP.
| POWER |
| EJECT | 6 |
3 |
| TRACKING |
|
|
5 | REW/SEARCH | PLAY | FF/SEARCH | 4 |
|
| STOP | PAUSE/STILL |
Helpful Hints
•Other playback options and features are explained on pages 17 and 18.
•Moisture may condense inside the unit when it is moved from a cold place to a warm place, after heating a cold room, or when the humidity is high. When moisture has accumulated in your VCP, the POWER light will blink. (This indication is available on the VPZ215AT only. On the VPZ210AT, there is no indication that moisture has accumulated.) If you try to play a tape in a VCP in which moisture has accumulated, the tape and the VCP could be damaged. If the POWER light is blinking, keep the VCP power on (but do not play a tape) for at least two hours. When the POWER light stops blinking, it is safe to play a tape.