How to change a programmed recording (TIMER)
1.Switch on the TV. If required, select the pro- gramme number for the video recorder.
2.Press MENU . The main menu will appear.
3.Select 'TIMER' with PLAY
Then press 
.
4.Select 'ONCE', 'DAILY' or 'WEEKLY' record- ing with PLAY
.
5.Select a TIMER block with 
. (The flashing number indicates an empty TIMER block.)
ONCE
TIMER - 1 2 3 4 5 6 7 8 -
SELECT TIMER NUMBER
END=EXIT
6.Press | CLEAR |
| to delete information and input | |||||
correct information with |
|
| . | |||||
0..9 | ||||||||
7.To end, press |
|
|
| . | ||||
| STATUS/EXIT | |||||||
8.Switch off with |
|
|
|
|
| . | ||
| STANDBY/ON y | |||||||
Problems and solutions for programmed recordings
Error message: ' 
' flashes in the video recorder display
• No cassette was inserted. Insert a cassette and
switch off the video recorder using STANDBY/ON y .
Cassette was ejected as soon as the
STANDBY/ON y button was pressed
•A cassette without the security tab was inserted. Undo the erase protection (chapter 'Manual record- ing', section 'Preventing accidental erasing') or
insert a different cassette.
'TURN OFF VCR FOR TIMER RECORDING' flash- es on the TV screen
•The video recorder is switched on several minutes before the start of a programmed recording. Switch
off the video recorder with 
. A pro- grammed recording (timer) will only function when the video recorder is switched off.
Cassette is ejected during recording
•The end of the tape was reached during recording.
The video recorder does not react
•While a programmed recording is being made, you cannot operate your video recorder manually. If you want to cancel the programmed recording, press STOP/EJECT on the front panel.
12 | EN |
|
