Front of your VCR
STANDBY/ONy To switch off or on, interrupt menu
function.
PROGRAMME+ 
PROGRAMME- To select the programme number. During playback, press to adjust the tracking.
RECORD To record the TV channel selected at this
moment.
FWD. When tape playback is stopped, press to fast forward the tape at high speed. During playback, press to fast forward the tape while the picture stays on the screen.
REW.
When tape playback is stopped, press to rewind the tape at high speed. During playback, press to rewind the tape while the picture stays on the screen.
PLAY To play back a tape.
STOP/EJECT To stop the tape and eject the
cassette.
Back of your VCR
TV To connect the TV.
AERIAL To connect the aerial cable.
RF OUT To connect the TV.
2. Important notes for operation
Navigation in the screen menu
You can check/change many functions and settings of your video recorder via the
Call up the menu: with MENU .
SELECT K L CHOOSE B
→TIMER RECORD SET UP VCR SET UP TUNER SET UP INITIAL SET UP
END=EXIT
The symbols on your video recorder display
These symbols can light up on your video recorder dis- play:
When you keep your video recorder on.
When you have put a cassette in the video recorder.
Display of programme number of the TV channel / time / RF channel.
When you record.
To select: with | PLAY | STOP | . |
| When you have programmed a recording. | ||||||||||
To enter or change your selection: with the num- |
|
| |||||||||||||
ber buttons |
| or with |
|
|
|
|
| . |
|
| |||||
0..9 |
| PLAY |
| STOP |
|
| |||||||||
To save or confirm: with |
|
|
|
|
| . |
|
|
| ||||||
| FWD 1- B |
|
| ||||||||||||
To cancel: with |
| . |
|
|
|
|
|
|
|
|
|
| |||
CLEAR |
|
|
|
|
|
|
|
|
| ||||||
To end: with |
|
|
|
|
|
|
| . |
|
|
|
|
|
|
|
| STATUS/EXIT |
|
| ||||||||||||
Switching on
You can switch on the video recorder with the
STANDBY/ON y
button.
Automatic switch-off
If the video recorder is not used for several minutes, it switches itself off automatically. This function can be deactivated (e.g. if you want to use the video recorder as a TV receiver). For more information, please read the section 'Automatic
Time in the display
If you have switched the video recorder off with '18:00'.
If the clock has not been set, '
STANDBY/ON y
, the time will show in the display, e.g.
Power consumption
The video recorder should always be connected to the mains so as not to affect the use of the TV or programmed recordings.
If the display has been switched off, your video recorder consumes less than 3W in
Power outage/no power
Channel information remains saved for up to 1 year, the time and timer information is saved for up to 1 minute.
3 | EN |
|
