Specifications
Voltage:
Power consumption : 20W
Power consumption (Standby): less than 3W (PWR. in the display switched off)
Rewind time: approx. 70 seconds (cassette E- 180)
Dimensions in cm (WxDxH): 36.0x22.6x9.2
Number of video heads : 4
Number of video heads (HIFI): 2
Recording/playback time:
3 hours (SP) (cassette
6 hours (LP) (cassette
Supplied accessories
•Operating instructions
•Remote control and batteries
•Aerial Cable
1. Connecting the video recorder
Preparing the remote control for operation
The remote control and its batteries are packed separately in the original video recorder packag- ing. You must install the batteries in the remote control before use.
1.Take the remote control and the enclosed batteries (2 batteries).
2.Open the remote control's battery compart- ment and place the batteries in it as shown in the picture and close the battery compart- ment.
The remote control is now ready to use. Its range is approximately 5 metres.
Connecting your video recorder to the TV set
The necessary cable connec-
tions must be made before you can record or playback
TV programmes using your video recorder.
We recommend that you use a scart cable to con- nect your TV and video recorder.
What is a scart cable?
The scart or Euro AV cable serves as the universal connector for picture, sound and control signals. With this type of connection, there is practically no loss of quality during the picture or sound transfer. *You can have the
Connecting with a scart cable
Have the following |
|
|
|
|
cables ready: |
|
|
|
|
an aerial cable (1, sup- |
|
|
|
|
plied), a scart cable (2, |
|
| 1 | 2 |
not supplied). |
|
| ||
|
|
|
| |
1.Remove the aerial |
|
|
|
|
cable plug from your |
| AV1 (TV) | AERIAL |
|
TV set. Insert it into |
|
|
|
|
the AERIAL at the |
|
|
|
|
back of the video |
|
|
|
|
recorder. |
|
|
|
|
2.Insert one end of the |
|
|
|
|
supplied aerial cable |
| AV1 (TV) |
|
|
|
| RF OUT |
| |
into the RF OUT at |
|
|
| |
|
|
|
| |
the back of the video |
|
|
|
|
recorder and the |
|
|
|
|
other end into the |
|
|
|
|
aerial input socket at |
|
|
|
|
the back of the TV set. |
|
|
| |
3.Plug one end of a |
|
|
|
|
scart cable into the | AV1 (TV) |
|
|
|
|
|
|
| |
scart socket AV1(TV) |
|
| AV1(TV) |
|
at the back of the |
|
|
|
|
video recorder and the other end into the suitable scart socket on your TV reserved for the video recorder operation (see your TV's operating instructions).
4.Switch on the TV.
5.Insert AC cable into the wall socket.
My TV has several scart sockets. Which one should I use?
Select that scart socket which is suited for the video output as well as for the video input.
My TV has a configuration menu for the scart socket.
Please configure this scart socket as Input- Output.
2 | EN |
|
