Philips DCR 2021 manual

EN

62

DIGITAL CONNECTION (B)

Connect the audio output socket to the relevant digital audio input socket of your audio equipment using a single CINCH cable (not supplied). Consult the user manual of your audio equipment to locate the proper digital audio input.

With this connection set up you can only control the volume (up/down and mute) using your audio equipment remote control; refer to the user manual of your audio equipment.

4.3 Connecting of a video projector to watch digital TV

Connect the “TV” SCART socket of your Digital-Receiver to your video projector. Video projectors are often fed with S-Video format video signals. If this is the case with your projector, follow the instructions below for connection and installation:

1Connect a SCART/S-Video adapter to the “TV” SCART of your receiver (not supplied), and connect the adapter to the S-Video input of your video projector by means of a S-Video cable.

2Installation: refer to chapter 10.5.2 to change the “TV/VCR SCART output” setting of your Digital-Receiver to S-VIDEO/PAL-CVBS.

Image 15

Philips DCR 2021 user manual Connecting of a video projector to watch digital TV

Contents

Benutzerhandbuch Dear Customer Foreword Quick installation Press OK to start scanning for channels Meaning of symbols For future reference Safety instructions Contents Restoring factory settings Timer ManagerSettings Advanced settings Front panel Product description Rear panel Insert the smartcard with the golden chip facing up Inserting your Smart Card RED, GREEN,YELLOW Blue Remote control Connecting to a TV and VCR both fitted with Scart sockets Connecting your Digital-receiver Analogue Connection a Connecting to your audio equipment analogue or digital Connecting of a video projector to watch digital TV Set your TV display format First installationFirst installation settings Channel scan Before starting a new scan Search failure Digital radio Using Low Power modeYour cable receiver is in standby mode Day-to-day operation PIN code Using number keysUsing P+/P- keys Using channel lists To close the banner, press Info a third time Volume control / +Banner To modify your PIN code, refer to paragraph PIN-Code Change While watching digital TV or listening to digital radio Current programme options Deleting an active timer Recording timersSet a timer from the EPG Setting a timer via the Timer Manager Switching to analogue TV Premiere Multifeed Premiere features Menu tree Menu Tree Basics Changing settingsCancelling/storing changes Menu navigation System Premiere Service MenuPIN-Code Change Smartcard Display Dolby DigitalWake-up channel To set a new timer or edit an existing timer Setting your receiverTimer Manager To delete an existing timer Channel Manager List OrganizationMonday to Friday , or Monday to Saturday Scroll to the channel you want to move using the ty keys List EditingChannel List Main TV, which is the only editable list Settings Channel PoolDisplay options For Parents To enable Parental LockTo modify your receiver password Must not be used as a password Enter your new password again to confirm Press Exit Advanced settingsTV Settings System Settings Decoder Status Time SettingsFactory settings You can also access this screen via the Premiere menu Channel Search Your receiver later, and then press OK to confirmSoon as you set your receiver to standby 11.3 VCR/DVD Recorder Control Other settingsRestoring factory settings Changing the remote control configuration EXT Recording with the VCR/DVD Recorder Control feature Digital-Receiver and VCR or DVD settingsPage Problem Possible cause Action Troubleshooting Change the TV Scart Output Video decoding Technical specifications 3111 176