84
EN

11.1 Restoring factory settings

1Press MENU,then 6, and then 4.
2Press the red colour key.
If you restore the factory settings of your receiver,you lose all the settings you
stored previously and have to restart from first installation.
To restore your receiver factory settings,refer to paragraph 10.5.4.

11.2 Changing the remote control

configuration

If you have other items of equipment in your home and the remote control of the
Philips receiver interferes with them,you can change the setting of the remote
control.For this you must change the setting of both your receiver and remote
control.

11.2.1 To change the setting of your receiver

Refer to paragraph 10.3.1.

11.2.2 To change the configuration of your remote control:

1Simultaneously press number keys 1and 3 and hold them for at least 3 seconds.
2Simultaneously release the two keys.
3Enter the newsetting within the next 60 seconds:
•5 for alternativesetting corresponding to setting 38
•1for the default factory setting corresponding to setting 39.
4Press OK.
If the batteries are removed while a key is being pressed,the default factory setting
(39) is restored.

11.3 VCR/DVD Recorder Control

11.3.1 Connecting your receiver for Video/DVD Recorder

Control

Recorder control allows automatic recording without requiring you to programme
your VCR or DVD recorder.All you need to do is set a recording timer for your VCR
or DVD recorder to start/stop recording.
11 Other settings
DCR 2021_Premiere_indice 1b 7/03/06 11:45 Page 84