1 Product description
1.1 Front panel
EN
|
|
|
|
|
|
|
|
| Q | W E R T | |||||
1 | Smart Card slot: | see chapter Inserting your Smartcard | |||||
2 | I | . . . channel - | |||||
3 | U | . . . channel + | |||||
4 | . . . . . . . . . . . . . | . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | . . . remote control receiver window | ||||
5 | . . . . . . . . . | . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | . . . ON/ Low Power/Reset (5 second key press) | ||||
The front panel 
button includes a colour LED indicating the receiver status.The LED blinks at remote control command reception.
STATUS INDICATOR TABLE
Indicator | LED |
Mode |
|
Low power | red |
Standby | orange |
TV/Radio mode | green |
Timer active in running mode | Dimmed green |
Timer active in standby | Dimmed orange |
Download in progress | Blinking red |
|
|
If you have put your receiver in “standby” and the LED is blinking red, it indicates that an upgrade of your receiver is taking place. Do not interrupt this operation.Wait for the LED to blink green, indicating successful download.You can then continue as normal.
When your receiver is in low power mode, software functions are no longer supported.Therefore EPG data may not be
56
