Analogue Connection a | Philips DCR 2021 guide

-Connect the “RF In” socket of your Digital-Receiver to the cable wall socket using the RF coaxial cable supplied.

-Connect the “TV” SCART socket of your Digital-Receiver to the RGB capable SCART socket of your TV using the SCART lead supplied with your Digital- Receiver.

This connection also applies if your VCR has two SCART sockets.
With this connection set up, you can:
• Watch digital TV while you record analogue TV.	EN
• Record the digital TV channel you are watching.	EN
• Watch play-back from your VCR.

4.2 Connecting to your audio equipment (analogue or digital)

Depending on your audio equipment, you might have several options to connect your Digital-Receiver.

Cable Receiver

to AC outlet

AB

Analogue

input

		Audio equipment
AUDIO
		Digital
L	R	input

ANALOGUE CONNECTION (A)

Connect the L/R audio output sockets to the relevant L/R audio input sockets of your audio equipment using a double CINCH cable (not supplied). Consult the user manual of your audio equipment to locate the proper analogue audio inputs.

With this connection set up you can control the volume (up/down and mute) using

either your Digital-Receiver or audio equipment remote control.

61

Image 14

Philips DCR 2021 user manual Connecting to your audio equipment analogue or digital, Analogue Connection a

Contents

Benutzerhandbuch Foreword Dear Customer Quick installation Press OK to start scanning for channels Meaning of symbols Safety instructions For future reference Contents Advanced settings Timer ManagerSettings Restoring factory settings Product description Front panel Rear panel Inserting your Smart Card Insert the smartcard with the golden chip facing up Remote control RED, GREEN,YELLOW Blue Connecting your Digital-receiver Connecting to a TV and VCR both fitted with Scart sockets Connecting to your audio equipment analogue or digital Analogue Connection a Connecting of a video projector to watch digital TV Channel scan First installationFirst installation settings Set your TV display format Search failure Before starting a new scan Day-to-day operation Using Low Power modeYour cable receiver is in standby mode Digital radio Using channel lists Using number keysUsing P+/P- keys PIN code To modify your PIN code, refer to paragraph PIN-Code Change Volume control / +Banner To close the banner, press Info a third time Current programme options While watching digital TV or listening to digital radio Setting a timer via the Timer Manager Recording timersSet a timer from the EPG Deleting an active timer Switching to analogue TV Premiere features Premiere Multifeed Menu Tree Menu tree Menu navigation Changing settingsCancelling/storing changes Basics Smartcard Premiere Service MenuPIN-Code Change System Wake-up channel DisplayDolby Digital To delete an existing timer Setting your receiverTimer Manager To set a new timer or edit an existing timer Monday to Friday , or Monday to Saturday Channel ManagerList Organization Channel List Main TV, which is the only editable list Scroll to the channel you want to move using the ty keysList Editing Display options SettingsChannel Pool Must not be used as a password To enable Parental LockTo modify your receiver password For Parents System Settings Advanced settingsTV Settings Enter your new password again to confirm Press Exit You can also access this screen via the Premiere menu Time SettingsFactory settings Decoder Status Soon as you set your receiver to standby Channel SearchYour receiver later, and then press OK to confirm Changing the remote control configuration Other settingsRestoring factory settings 11.3 VCR/DVD Recorder Control EXT Digital-Receiver and VCR or DVD settings Recording with the VCR/DVD Recorder Control featurePage Troubleshooting Problem Possible cause Action Change the TV Scart Output Technical specifications Video decoding 3111 176