Philips DCR 2021 user manual Rear panel

1.2 Rear panel

Y

EN

Q W E R T U I

1 5V (*): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2 RF Out (*): . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3 RF In (*): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4 TV (*): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5 VCR/DVD (*): . . . . . . . . . . . . . . . . . . . . . . .

6 (*): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Socket used to connect the power cord.

RF output used to connect your receiver to a VCR/TV set to watch analogue channels only, or to connect another receiver.

RF input used to connect the antenna cord from the wall socket. Refer to chapter Connecting your Digital-Receiver.

SCART(1) socket used to connect your TV set.

SCART(1) socket used to connect your video recorder or DVD player/recorder.

Digital audio cinch output used to connect your HiFi/audio receiver system.

7 IR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Not active on this receiver system.

8 L/R (*): . . . . . . . . . . . . . . . . . . . . . . . . . . . Left/Right analogue audio cinch outputs used to connect your HiFi/audio receiver system.

The label showing the type and serial number is underneath the receiver.

(1)SCART is also called Euroconnector or Peritel.

* Safety Extra Low Voltage

Note: if you consider using a video projector, refer to its user manual for the best video format to feed it. If necessary, refer to paragraph System Settings to properly set the TV/VCR SCART output.

57