6.9 Recording timers
Recording timers are used to perform VCR or DVD recordings.
6.9.1 Set a timer from the EPG
6.9.1.1 Setting a timer on the programme you
| are watching | EN | |
1 | Press EPG. | ||
| |||
2 | Press TIMER. |
|
6.9.1.2 Setting a timer on a future programme
1Press EPG.
2Move to the programme you want to record.
3Press TIMER.
4Proceed as indicated in paragraph 10.1.
6.9.2 Setting a timer via the Timer Manager
Refer to paragraph 10.1.
6.9.3 Deleting an active timer
A timer is active. Recording is signalled by the front LED lit in dimmed green in TV or Radio mode or dimmed orange if your receiver is in standby.
To delete the active timer:
1If your receiver is in standby, press P+,
2Press the key sequence TIMER then 0.The LED is no longer dimmed and you can change channels.
When a recording timer is active, you cannot change digital channels, but you can switch to analogue TV using the TV/STB key and zap through analogue channels.
6.9.4Your receiver is blocked with the front panel LED lit in
dimmed green or orange.
Your receiver is blocked because a timer is active. Press the key sequence TIMER then 0 to delete the timer and recover full control of your receiver.
69
