•
•System board serial number
•Asset Tag
•CPU Type
•CPU Speed
•Installed memory
•UUID
•MAC address (Internal LAN)
Config menu
If you need to change the configuration of your computer, select Config from the ThinkPad Setup menu.
Notes:
•Default values are in boldface. The default settings are already optimized for you. If you consider changing the computer configuration, proceed with extreme caution. Setting the configuration incorrectly might cause unexpected results.
•On each submenu, press Enter to show selectable options and select a desired option, or type desired values from the keyboard directly.
•Some items are displayed on the menu only if the computer supports the corresponding features.
The following table lists the Config menu items.
Table 4. Config menu items
Menu item | Submenu item | Selection | Comments | |
|
|
|
|
|
Network | Wake On LAN | • | Disabled | Enable the system to Power on |
|
| • | AC Only | when the Ethernet controller |
|
| receives a magic packet (a | ||
|
| • | AC and Battery | |
|
| special network message). | ||
|
|
|
| If you select AC Only, the Wake |
|
|
|
| on LAN function is enabled only |
|
|
|
| when the ac power adapter is |
|
|
|
| attached. |
|
|
|
| If you select AC and Battery, |
|
|
|
| the Wake on LAN function is |
|
|
|
| enabled with any power sources. |
|
|
|
| Note: AC power is required with |
|
|
|
| magic packet type Wake on |
|
|
|
| LAN. |
|
|
|
| Note: The Wake on LAN function |
|
|
|
| does not work when a hard disk |
|
|
|
| password is set. |
|
|
|
|
|
| Ethernet LAN Option ROM | • | Disabled | Load the Ethernet LAN Option |
|
| • | Enabled | ROM to enable startup from an |
|
| integrated network device. | ||
|
|
|
| |
|
|
|
|
|
| Wireless LAN Radio | • | On | If you select On, the internal |
|
| • | Off | wireless radio is turned on. If you |
|
| select Off, the internal wireless | ||
|
|
|
| |
|
|
|
| radio is turned off. |
|
|
|
|
|
Chapter 7. Advanced configuration 89