Dynacord H 5000, H 2500 owner manual Structure of the CONFIG/EVENT LOG menu

PowerH SERIES

CONFIG/Menu Service: The menu entry Menu Service branches to the SERVICE submenu. The entries in the SERVICE menu are explained in detail in paragraph Structure of the CONFIG/SERVICE menu (see page 26).

CONFIG/Amplifier Name: Displays the name of the power amplifier. The menu entry only exists when no RCM-26 is installed in the power amplifier. With a remote control module installed, the power amplifier has to be named via IRIS-Net™. Pressing the ENTER button opens the Set Amplifier Name dialog box.

The Set Amplifier Name dialog allows changing the power amp’s name, which can be composed of a maximum of 20 symbols and consist of all letters a-z, A-Z, the numbers 0-9 and special characters.

Pressing the Up/Down buttons locates the cursor at the desired position of the name. Pressing the ENTER button accepts the desired symbol and moves the cursor to the next character. Pressing the ENTER button after manipulating the last character, stores the desired name of the power amplifier in the memory and the display returns to the CONFIG menu.

The following special characters provide special functions when entering a power amp’s name:

Character	Function
↵	Accepts the entered name and returns to the menu.

ADeletes the currently selected symbol and moves the cursor by one character to the right.

I Set the cursor by one character to the left.

Table 3.2: Functions of special characters when entering the power amp’s name

Structure of the CONFIG/EVENT LOG menu

CONFIG/EVENT LOG/Counter POWER UP: This menu item shows how many times the power switch on the front panel has been used.

CONFIG/EVENT LOG/Counter AMP ON: This menu item shows how often the power amplifier has been activated from the OFF or STANDBY state.

Owner’s Manual 23