
PowerH SERIES
|
| Speakon CH A |
| |
|
|
|
|
|
Connection Pin | 1+ | 1- | 2+ | 2- |
|
|
|
|
|
Channel Assignment | A+ | A- | B+ | B- |
|
|
|
|
|
Table 2.6:
Output (Speakon-type Connectors / Terminals) in Bridged Mode
Setting the MODE switch on the power amp’s rear panel to BRIDGED lets the power amplifier run in bridged mode operation and speaker connection has to be established using pins 1+ and 2+ of the Speakon socket CH A, see illustration 2.16.
Illustration 2.16: Speaker connection in BRIDGED operation mode, using Speakon A
| Speakon CH A | |
|
|
|
Connection Pin | 1+ | 2+ |
|
|
|
Channel Assignment | Bridged+ | Bridged- |
|
|
|
Table 2.7: Speaker connection in BRIDGED operation mode, using Speakon A
When using the speaker terminals in BRIDGED mode, the loudspeaker system has to be connected to the red terminals of CHANNEL A and CHANNEL B. An illustration of how to correctly establish speaker connection for this mode of operation is provided on the power amp’s enclosure.
Illustration 2.17: Speaker connection in BRIDGED operation mode, using Terminals
CAUTION:
Due to the high current, using banana plugs for speaker connection is not permissible.
18 Owner’s Manual