
PowerH SERIES
Structure of the CONFIG menu
Entering the CONFIG menu is possible through pressing the ENTER button while the entry >> CONFIG << is highlighted in the status display. The following provides detailed information about the individual items of the configuration menu.
Using the Up/Down buttons in the Set
CONFIG/Breaker Current: The actually set value of the current that controls the Mains Circuit Breaker Protection is displayed. The set current has to match the value of the power amp’s internal fuse for the protection to work correctly. Please refer to the explanations on page 32 for more details. Pressing the ENTER button opens the Set Breaker Current dialog box where the desired value for the breaker current can be set.
The valid value ranges depend on the power amp’s power supply. Currents between 6 A and 40 A can be set when the power amplifier is operated at 120 V. Currents between 6 A and 30 A can be set when the power amplifier is operated at
NOTE:
Operating the power amplifier on a separately fused mains power line is recommended only.
CONFIG/Show Event Log: The menu entry Show Event Log leads to the EVENT LOG submenu. The individual entries in the EVENT LOG menu are explained in detail in the paragraph Structure of the CONFIG.EVENT LOG menu (see page 23).
CONFIG/Menu Display: The menu entry Menu Display leads to the DISPLAY SETUP submenu. Each entry in the DISPLAY SETUP menu is explained in detail in paragraph Structure of the CONFIG/DISPLAY SETUP menu (see page 24).
22 Owner’s Manual