PowerH SERIES
CONFIG/DISPLAY SETUP/Temperature Unit: The currently selected unit for the indication of temperature values is displayed.
Pressing the ENTER button opens the Set Temperature Unit dialog box, which allows selecting °C (Degrees Celsius) or °F (Degrees Fahrenheit) by pressing the Up/Down buttons. Pressing the ENTER button stores the selected unit in memory and the CONFIG menu reappears on the display.
Structure of the CONFIG/SERVICE menu
CONFIG/SERVICE/Restore Amplifier’s Factory Settings: The power amplifier can be reset to factory settings. Pressing the ENTER button opens a safety dialog box that lets the user choose between YES or NO by pressing the Up/Down buttons. If YES has been selected, pressing the ENTER button resets the power amplifier to its factory settings. If the user selected NO, all power amp parameters stay unchanged and the display returns to the CONFIG. menu.
The following table lists all parameters that are affected by a reset:
Parameter | Value |
|
|
0.00 s | |
|
|
Breaker Current (depends on | 16 A (230 V) / 30 A (120 V) |
the supply voltage) |
|
|
|
Amplifier Name | Dynacord H2500 |
| or |
| Dynacord H5000 |
|
|
LCD Contrast | 50 % |
|
|
LCD Brightness High | 90 % |
|
|
LCD Brightness Low | 40 % |
|
|
LCD Time to Dim | Autodim off |
|
|
Temperature Unit | °C |
|
|
Table 3.3: Factory settings of the LC display
CONFIG/SERVICE/Lifetime: This menu item shows the total running time of the power amplifier (not counting standby times).
26 Owner’s Manual
