AUTO TUNING
SEARCHING
00 TV CHANNELS FOUND
ƒƒƒƒƒƒƒ__________________
PLEASE WAIT...
Using the satellite receiver
TV channels from a satellite receiver (connected to the scart socket EXT.2 AV. 2 ) are received on the video recorder on programme number 'E2'.
To do this, select programme number 'E1' with 0 on the remote control and then select programme number 'E2' with P =r .
You should select the TV channels to be received by the satellite receiver directly on the receiver itself.
Automatic TV channel search
During installation, all available TV channels are searched for and saved. If the channel assignments of your cable or satellite TV provider change or if you are reinstalling the video recorder, e.g. after moving house, you can start this procedure again. This will replace the TV channels already saved with the new ones.
1Switch on the TV set. If required, select the programme number for the video recorder.
2Press the MENU button on the remote control. The main menu will appear.
3Select line 'AUTO TUNING' using P =r or P ;q .
4Press OK .
5Select the country of your residence with P ;q or P =r . If your country doesn't appear, select 'OTHERS'.
6Press OK .
7The automatic TV channel search starts. This allows the video recorder to save all available TV channels. This procedure may take several minutes.
8When the TV channel search is complete, 'STORED' will briefly appear on the TV screen.
9To end, press MENU .
You can read about how to search for a TV channel manually in the section 'Manual TV channel search'.
14 | Installing your video recording |
|
