Philips VR960BPH owner manual Timer Recording with the VCR Plus+ Programming System, Number

38 Timer Recording with the VCR Plus+ Programming System

Follow the steps below to program a timer recording using PlusCode programming numbers. Before you begin make sure:

•Channels are set up. Details are on pages 12-13.

•The clock is set. Details are on pages 14-18.

•There is a tape in the VCR. Make sure the tape’s record tab is intact and the tape is long enough to record the program(s).

•The VCR is in VCR position (the VCR light will appear on the display panel). If the VCR light does not appear, press the VCR/TV button once.

•You have programmed the VCR Plus+ and Cable/TV channel numbers. Details are on pages 36-37.

Complete each step within 60 seconds of completing the previous step. If you don’t, you may start again at step 1.

1

Press the VCR button.

2

Press the TIMER button.

→VCR PLUS+

QUICK PROGRAMMING PROGRAM REVIEW

SELECT: ,9	CONFIRM: OK
END: TIMER

3

Press the PLAY 8 or STOP 9 button to select VCR

PLUS+, then press the OK/STATUS button.

VCR PLUS+ PROG. CODE

VCR PLUS+ L

END: TIMER

4

Use the Number buttons to enter the PlusCode programming number of the program you wish to record. (This number is different for every program.)

VCR PLUS+ PROG. CODE

VCR PLUS+ 123L

CONFIRM: OK

CORRECT: CLEAR

END: TIMER

CBL / DBS					TV				VCR		1
	VCR/TV			POWER SMARTPICTURE
	QUICK PROGRAMMING
	1		+		2	+			3		4
	7		.............		8				9
	START			STOP				DATE
	4		-		5	-			6
				DAILY			WEEKLY
	SPEED			DBS
	ALT				0		CLEAR
-			STILL/SLOW						+	-
	- ....				.......			.
	....
REW									FF
				PLAY							3
				STOP
	VOL		OK/STATUS						CH
				MENU
				TIMER							2
TURBO		AUDIO/			SKIP				REC END
TIMER		MUTE			SEARCH				SEARCH
	EJECT								REC /OTR

Helpful Hint

•If you enter an incorrect PlusCode programming number at step 4, ERROR-RE-ENTER CODE will flash on the screen after step 5. Enter the correct PlusCode programming

number.