Philips VR960BPH owner manual Hookups with a Cable Box/Direct Broadcast System, Connections

8 Hookups with a Cable Box/Direct Broadcast System

There are two ways to connect your Cable Box/DBS to the VCR. With this connection:

•You may view any channel.

•You must select channels at the Cable Box/DBS. Channels cannot be changed at the VCR.

•You may not view a channel other than the one you are recording.

•You may not set up channels at the VCR.

•You can only program a timer recording for one channel at a time if you are not using the Controller. Set the TV and the VCR to the Cable Box/DBS output channel (channel 03 or 04); set the CH3/CH4 switch to the same channel. Set your Cable Box/DBS to the channel you want to record. When you enter the channel you want to record in a timer recording, select channel 03 or 04 (the Cable Box/DBS output channel). (This is step 3 on page 40.) Leave the Cable Box/DBS on for a timer recording.

•To set up the Controller, see pages 49-53.

VCR

Cable Box/DBS

	IN
	OUT		CABLE
1			BOX IN OUT ANT.IN
	S IN	OUT	R
			AUDIO
	V		L
	I
	D		RF OUT
	E		VIDEO
	O		CH3 CH4

Cable signal

75Ω
AN	/
T
CA
BLE

TV’s

ANTENNA

IN jack

2 RF coaxial cable

Connections

1

3RF coaxial cable

Connect a Cable signal to the IN jack on the Cable Box/DBS.

2

Use an RF coaxial cable (supplied) to connect the OUT jack on the Cable Box/DBS to the ANT(enna) IN jack on the VCR.

3

Use a second RF coaxial cable to connect the RF OUT jack on the VCR to the TV’s ANTENNA IN jack.

Recording/Viewing Any Channel

1

With the VCR on and in VCR position (the VCR light will appear on the display panel), use the CH(annel) 8/9 button to set the VCR to the Cable Box/DBS output channel (channel 03 or 04).

2

Set the TV to the same channel to which you set the VCR. Set the CH3/CH4 switch on the VCR to the same channel.

3

Select the channel you want to view/record at the Cable Box/DBS.

Helpful Hint

•If you are using Record Link, use audio and video cables to connect the AUDIO/VIDEO OUT jacks on the Cable Box/DBS to the AUDIO/VIDEO IN jacks on the back of the VCR. Details are on page 35.