Philips VR960BPH owner manual Turning on Your VCR, Turn on the TV

10 Turning on Your VCR

•Before turning on your VCR, make sure there are batteries in the remote control and the VCR, TV, and Cable Box/DBS (if applicable) are connected.

•The menus will continue to appear every time you turn on the VCR until you complete the steps on pages 10-11.

•If you want to set up the Controller now, you must first connect the Controller. See page 49 before continuing.

•Leave the Cable Box turned on if you plan to set up the Cable Box Controller now.

•If you plan to set up the Controller now, set the Cable Box to a channel other than channel 09.

•Read through these steps before you begin; the process will be easier if you familiarize yourself with this information before beginning.

1

Press the VCR button, then press the POWER button.

2

Turn on the TV. Set it to channel 3 or 4, whichever channel the CH3/CH4 switch on the back of the VCR is set to (or your Cable Box/DBS output channel, if applicable). The menu shown below will appear.

➔ENGLISH ESPAÑOL FRANÇAIS

SELECT: 89	CONFIRM: OK
END: MENU

3

Press the PLAY 8 or STOP 9 button to select the language of the on-screen displays and menus.

2 Turn on the TV.

CBL / DBS				TV					VCR	1
	VCR/TV			POWER SMARTPICTURE
	QUICK PROGRAMMING
	1		+	2		+			3
	START		.............	STOP		.............		DATE
	4		-	5		-			6
				DAILY				WEEKLY
	7			8					9
	SPEED			DBS
	ALT			0				CLEAR
			STILL/SLOW
-	....			.....			...		+	-
	- ....
REW									FF	3
				PLAY
				STOP
	VOL		OK/STATUS						CH	4
				MENU
				TIMER
TURBO		AUDIO/			SKIP				REC END
TIMER		MUTE			SEARCH				SEARCH
	EJECT								REC /OTR

4

Press the OK/STATUS button. The menu shown below will appear.

CABLE BOX CONTROLLER

OFF

AOFF	CH.=CHANNEL
ON CH. 2	ON CH. 7
ON CH. 3	ON CH. 8
ON CH. 4	ON CH. 9
ON CH. 5 ON A/V FRONT
ON CH. 6	ON A/V REAR
SELECT: , 9	CONFIRM:OK
END:MENU

Helpful Hints

•Auto or – – : – – may appear on the display panel until the clock is set.

•If you do not want to set up channels now, press the MENU button at step 6. TUNER NOT SET will appear on the screen briefly.

•You may not set up channels at step 6 if you are using a Cable Box/DBS.