20 On-Screen Status Displays
A status display will appear when you press the STATUS/EXIT button or certain function buttons. The contents of the status display will vary. To choose the status display mode, follow the steps below.
If you select STATUS ON, then select COUNTER ONLY ON:
● Whenever you press the STOP/p button or the PLAY/o button, |
Status Display (example only)
the status display will appear for five seconds. After five seconds, |
only the counter will remain on the screen. You must press the |
STATUS/EXIT button to remove it. Portions of the status display |
also may appear when you press other function buttons.
If you select STATUS ON, then select COUNTER ONLY OFF:
●Whenever you press the STOP/p button or the PLAY/o button, the status display will appear for five seconds. Portions of the sta-
tus display also may appear when you press other function but- tons.
If you select STATUS OFF:
Current status of tape
STOP
TV STEREO
Receiving and Recording Mode
Channel
Time
12:00 AM CH10
STEREO
2ND AUD
● The status display will not appear when you press function but- | SLP | M 1:23:45 HIFI | |||
tons. You must press the STATUS/EXIT button to see the status |
|
|
|
|
|
display. |
|
|
|
|
|
|
|
|
|
|
|
1
Press the VCR button, then press the MENU button.
2
Press the PLAY/o button or the STOP/p button to select VCR SET UP, then press the F.FWD/B button.
3
Press the PLAY/o button or the STOP/p button to select ON SCREEN MODE, then press the F.FWD/B button.
4
Press the PLAY/o button or the STOP/p button to select STATUS, then press the F.FWD/B button so that OFF (or ON) appears beside STATUS.
SELECT op CHOOSE B
→ STATUS | [ON] |
COUNTER ONLY | [OFF] |
TO END PUSH EXIT
5
If you set STATUS to OFF, go to step 6. If you set STA- TUS to ON, press the PLAY/o button or the STOP/p button to select COUNTER ONLY, then press the F.FWD/B button so that OFF (or ON) appears beside it.
6
Press the STATUS/EXIT button.
Tape | Counter | Audio | ||
Speed | and | Out | ||
| Counter | Mode | ||
| Memory | MTS |
|
|
|
|
|
| |
|
|
| ||
|
| Broadcast | ||
|
| Available | ||
Helpful Hint
•You may not access a status display when viewing a still picture, during slow motion playback, or when the F.FWD/B or REW(ind)/s button is pressed during playback.
