12 Automatic Channel Setup
Although your VCR may automatically memorize the channels you receive when you turn it on for the first time, this function lets you set up the channels again.
1
Press the VCR button.
2
Press the MENU button.
SELECT op CHOOSE B
→PROGRAM VCR SET UP TUNER SET UP SET CLOCK
TO END PUSH EXIT
1
2
POWER VCR/TV EJECT
VCR | TV |
| PLAY |
|
REW |
| F.FWD |
| STOP |
|
MENU | STATUS/EXIT | CLEAR |
3
Press the PLAY/o button or the STOP/p button to select
1 2 3
4 5 6
7 8 9
CH
TUNER SET UP, then press the F.FWD/B button.
SELECT op CHOOSE B
→AUTO PROGRAMMING ADD/DELETE CH
CH MEMORY REVIEW
TV STEREO | ON |
2ND AUDIO |
|
TO END PUSH EXIT
4
Press the PLAY/o button or the STOP/p button to select AUTO PROGRAMMING, then press the F.FWD/B but- ton. The VCR distinguishes between TV channels and cable chan- nels, and the VCR will place all the channels you receive into its memory.
ALT. CH
0VOL
SPEED TIME SEARCH PAUSE/STILL
REC/OTR MEMORY SLOW MUTE
5
Wait for a few minutes while the VCR sets up the chan- nels. When this is complete, CHANNELS ARE SET will appear on the screen. Then the programming of the lowest channel number placed in the VCR’s memory will appear on the screen. Now when you press the CH(annel) o/p button, you will scan only through channels you receive.
Helpful Hints
•You can not enter the TUNER SET UP menu when you are in Line Input mode (channel 00). When you select channel 00, A/V IN will appear on the screen briefly.
•You can not program channels if you are using a Cable Box or DBS.
•If you have an antenna, channels 2- 69 will be available. If you have a cable connection, channels
