10 Hookups With a Stereo TV
|
|
| antenna or |
|
|
| 1 ANT(enna)cable to |
AUDIO | ANT | IN Jack | |
| L | IN |
|
OUT | IN |
|
|
| R |
|
|
VIDEO | OUT |
| |
OUT | IN | CH3 CH4 |
|
|
| ||
VIDEO (yellow) and |
| 2 |
|
AUDIO (red and white) |
| Video Cable | |
OUT Jacks |
| ||
|
| ||
Audio and Video IN Jacks on TV
● Audio and Video cables are not supplied. 3 Audio Cable
1
Connect the antenna or cable to the ANT(enna) IN Jack on the back of the VCR.
2
Connect a video cable to the yellow VIDEO OUT Jack on the back of the VCR. Then, connect the other end of the video cable to the VIDEO IN Jack on your TV.
3
Connect an audio cable to the red and white AUDIO OUT Jacks on the back of the VCR. Then, connect the other end of the audio cable to the AUDIO IN Jacks on your TV.
4
Turn on your TV, making sure it is in Line Input mode. Please refer to your TV owner’s manual for details.
Helpful Hint
• A stereo audio cable (not supplied) is used here to deliver audio to the TV’s left and right channels.
• The TV must be in Line Input mode. Please refer to your TV owner’s manual.
