Philips VRA631AT owner manual Recording, If the VCR light appears on the display panel, go to . If

1Turn on the TV.

2Insert a tape in the VCR.

4

Recording 31

Read and follow the steps below to record a television program.

1

Turn on the TV and set it to channel 3 or 4, whichever channel the CH3/CH4 switch on the back of the VCR is set to.

2

Insert a tape with its record tab intact in the VCR.

3

Press the VCR button.

4

If the VCR light appears on the display panel, go to step 5. If the

VCR light does not appear, press the VCR/TV button once.

5

Press the SPEED button until the desired tape speed appears briefly on the screen. (Details about tape speed are on

page 36.)

6

Use the CH(annel) o/p button or the Number buttons to select the channel to be recorded.

7

Press the REC(ord)/OTR button once to start recording.

The REC(ord) light will appear.

8

To pause the recording, press the PAUSE/STILL button once. The REC(ord) light will flash. To resume recording, press the REC(ord)/OTR button or press the PAUSE/STILL button again. The REC(ord) light will come on again.

9

To stop recording, press the STOP/p button.

POWER VCR/TV EJECT

3	VCR	TV		CBL/DBS
		PLAY			9
	REW			F.FWD
		STOP
	MENU	STATUS/EXIT		CLEAR
6	1	2	3
	4	5	6	CH
	7	8	9
5	VCR PLUS+/ENTER		ALT. CH
		0		VOL	8
	SPEED TIME SEARCH PAUSE/STILL
	REC/OTR	MEMORY	SLOW	MUTE
7

Helpful Hints

•If you press the REC(ord)/OTR but- ton when there is not a tape in the VCR, NO CASSETTE will flash on the screen.

•If you press the REC(ord)/OTR but- ton while a tape without a record tab is in the VCR, the VCR will eject the tape and PROTECTED CAS- SETTE CANNOT RECORD will flash on the screen.

•Other recording options are on pages 32-42.

•You can change the tape speed during a recording, but some distor- tion will appear on the tape.

•The VCR will record in a preset vol- ume.