Philips VRA631AT Setting Up the VCR Plus+ Programming System cont’d, Examine the lists on

Setting Up the VCR Plus+ Programming System (cont’d) 39

2

Now, compare the channel numbers you have written in the VCR PLUS+ CH. and CABLE/TV CH. columns. For stations whose VCR Plus+ and Cable/TV channels do not match, you must tell the VCR the VCR Plus+ and Cable/TV channel numbers by following steps 3-7. Make each entry within 60 seconds of the previous entry.

3

Press the VCR button, then press the MENU button.

4

2 Examine the lists on page 38.

		4-6
3	POWER	VCR/TV	EJECT
	VCR	TV	CBL/DBS

PLAY

REWF.FWD

STOP

Press the PLAY/o button or the STOP/p button to select VCR SET UP, then press the F.FWD/B button.

SELECT op CHOOSE B
→ REPEAT PLAY	OFF
ON SCREEN MODE
AUDIO OUT
LANGUAGE
VCR PLUS+ REF. MAP

MENU

7 1

4

7

VCR PLUS+/ENTER

STATUS/EXIT

2 3

5 6

8 9

ALT. CH

0

CLEAR

CH

6

VOL

BLUE BACKGROUND ON

TO END PUSH EXIT

SPEED TIME SEARCH PAUSE/STILL

REC/OTR MEMORY SLOW

MUTE

5

Press the PLAY/o button or the STOP/p button to select VCR PLUS+ REF. MAP, then press the F.FWD/B button.

6

Look at the lists you filled in on page 38. For stations whose

VCR Plus+ and Cable/TV channels do not match, press the PLAY/o button or the STOP/p button until the arrow is beside the VCR Plus+ channel you need. Then, press the Number buttons to enter the corresponding Cable/TV channel from your list. Enter all the stations on your list.

●If you are recording from line input, press 0,0 to select AUX.

●If you are using a Cable Box/DBS, the Cable/TV chan- nel will be 3 or 4 (the Cable Box/DBS output channel) for every VCR Plus+ channel. You must set the Cable Box/DBS to the channel you want to record; leave the Cable Box/DBS on for the timer recording.

VCR PLUS+ CROSS REF. MAP

VCR PLUS+ CABLE/TV

9898

9999

1– – – – –> 23

22

TO SELECT CH PUSH op

THEN ENTER CH NO.

TO END PUSH EXIT

7

Press the STATUS/EXIT button.

Helpful Hints

•To erase a Cable/TV channel num- ber, repeat steps 3-5 on this page. Then, press the PLAY/o button or the STOP/p button until the arrow appears beside the Cable/TV chan- nel you need to erase. Press the CLEAR button, then press the STA- TUS/EXIT button.

•When you receive the VCR, all the VCR Plus+ channel numbers and Cable/TV channel numbers are the

same.

•If you are recording from line input, connect the audio and video cables to the AUDIO IN and VIDEO IN jacks on the back of the VCR. (Please see illustration on page 42.)