Philips VRA631AT owner manual Hi-Fi Stereo Sound System, Please see additional notes on

50 Hi-Fi Stereo Sound System

Multi-Channel Television Sound system broadcasts are automati- cally recorded in Hi-Fi stereo sound. To play in Hi-Fi stereo the tapes recorded in Hi-Fi stereo, however, you’ll need to follow steps 1-5.

1		1
Press the VCR button, then press the MENU button.
2
Press the PLAY/o button or the STOP/p button to select
VCR SET UP, then press the F.FWD/B button.
SELECT op CHOOSE B
→ REPEAT PLAY	OFF
ON SCREEN MODE
AUDIO OUT
LANGUAGE
VCR PLUS+ REF. MAP
BLUE BACKGROUND	ON

TO END PUSH EXIT

2-3

POWER	VCR/TV		EJECT
VCR	TV		CBL/DBS
	PLAY
REW			F.FWD
	STOP
MENU	STATUS/EXIT		CLEAR
1	2	3
4	5	6	CH
7	8	9
VCR PLUS+/ENTER	ALT. CH

0VOL

SPEED	TIME SEARCH	PAUSE/STILL
REC/OTR	MEMORY	SLOW	MUTE

3

Press the PLAY/o button or the STOP/p button to select AUDIO OUT, then press the F.FWD/B button.

SELECT op
→ HIFI	ON
MONO
TO END PUSH EXIT

Helpful Hints

•All programs are automatically recorded in both Hi-Fi stereo sound and in monaural sound.

•The audio level of a tape recorded in Hi-Fi stereo will differ from the audio level of a tape not recorded in Hi-Fi stereo.

•Normally, HIFI should be selected from the AUDIO OUT menu for playback with Hi-Fi sound. But, you can change the selection to MONO if you want monaural audio play- back. To do this, follow steps 1-3. At step 4, press the PLAY/o button or the STOP/pbutton to select MONO. Press the STATUS/EXIT button. HIFI will disappear from the status display during TV viewing.

•If you play non-Hi-Fi tapes while the VCR is set to HIFI, the tape will play in monaural sound.

Please see additional notes on page 53.